We have an oldtime washer that at long last bit the dust, and so I’ve chosen to undertaking several plans having its remains. I have to try to make a mechanical poultry plucker by using the bath and engine. I’ve taken apart and saved all the beneficial devices and scrap material, yet when they have to attempting to make the motor rotate, We rapidly got jammed. I’m wishing individuals can point myself through the right way.
Here you will find the specifications: washer model: Whirlpool LA7800XP engine: c68pxefd-3454
These are some picture for the motor and wires:
I would personally considerably enjoyed any assistance/advice.
Answers and Replies
- Sep 23, 2014
- Sep 23, 2014
Hi, Baluncore . many thanks for the response. Yes, I experienced bump into that bond previously with my research on the net. We followed the plan as intently since I could, but my situation’s slightly different. I don’t have a block externally as visualized in the bond, only loose wiring. In addition, my own colour vary. Some tips about what I’ve accomplished until now via testing:
Because of this setting, i’ve electric power coming from my personal test run connected to the energy remove, into the capacitor. Then, from capacitor to electric motor by way of the red-colored line. White connects to simple to my examination run, and surface travels to the electric motor cover. Right now, anytime I hook up the eco-friendly cable run while in the engine to natural, the electric motor moves. But rotates most slowly and gradually (maybe 100 rpm approximately), and after a couple of a few seconds decelerates further. Attaching the pink cable to simple too due to the fact eco-friendly wire connects to basic makes no difference. Attaching the purple wire to simple without connecting the environmentally friendly wire to neutral generates a hum, but no motion.
Any guidelines what you should attempt close to fully grasp this to change at full speed?
As a solitary period induction motor it has at the least two windings. (more…)